ALUMINUM DOORS - CAUSES AND CORE

ALUMINUM DOORS - CAUSES AND HOW TO CORRECT

 Aluminum door sagging is a common situation today. Especially, in projects that have used aluminum doors for a long time, it is easy to encounter this phenomenon. We can proactively overcome this situation with just a few simple tips. Let's learn in detail the cause and how to fix the aluminum door sag with Grando right away.

Phenomenon aluminum doors slump
Over time using due to many different reasons will cause aluminum doors to sag. It affects the aesthetics, the quality of the work quickly degrades and more importantly, the potential risks attached.

Causes and ways to fix aluminum doors slack

1. The hinge is broken
- Reason
You use poor quality hinges, poor door load. This led to the door being subjected to a heavy force from aluminum and glass frames. Leads to wing sag quickly. The hinge has not been cleaned or maintained for a long time, causing annoying squeals. Sometimes the wing sagging affects the homeowner's floor. The door opening and closing also becomes more difficult and prone to sagging wings.

- Solutions
Use quality hinges with clear origin. When executing and installing, it is necessary to have proper technique and certainty. In case the door has sagged, use grease to improve the flexibility of the hinge. Use a hammer with a pointed tip to pry the hinge cover up and then lubricate or Vaseline into the hinge. Maybe you put an extra washer on the hinges. Replace the hinge if the actual condition cannot be overcome. See also: Door hinge - What to know to avoid risks when using

2. Aluminum doors slump due to space architecture

- Reason
The size of the door mounting area is very important. You cannot press the door to fit in any space, which easily causes imbalance and sagging wings during use. Because each space will have to install an aluminum door with a certain size.

- How to fix
Measured and designed accordingly. Check the space to be installed to choose the right aluminum door.

3. Not strictly following the construction process
- Reason
Careless construction is the first danger of aluminum doors slack. During the construction process, do not screw up enough screws, do not be careful. From there, causing loose and double weight loss. The installation door is warped and does not comply with technical regulations.

- How to fix
Choosing a reputable construction unit with a clear construction process with correct techniques. Especially not to take lightly the warranty policy from them. It is a way to help you avoid basic errors, do not happen when the door sagged during installation. If after installing the aluminum door, there is a sagging wing, then respond to the construction unit for a warranty policy. Tighten all screws on the aluminum door to fix and increase the stability of the aluminum door. Use a clockwise screwdriver to loosen if the screw is in a deviation.

4. Aluminum door sag due to other door failure
- Reason
Long-term use leads to continuous opening and closing, door damage will occur. The door is hard to open, gets stuck, has an uncomfortable cry that will easily sag if this situation lasts.

- How to fix
You should not prolong this situation or fix it yourself, but you should quickly call the construction unit for warranty or call a repairman. See also: Suggest some popular aluminum doors today

5. Use too long
- Reason
Because aluminum doors have been used for too long, in poor external conditions. Due to shocks, collisions with heavy objects, deform the door's operation. Due to the oversized door, the hinge is too large in size to withstand loads for a long time.

- How to fix
Fix the hinge screw again. Avoid getting loose or add a spare hinge to secure the door if the door is too big and heavy. Replace the packing with a new one if the old one is detached to allow the door to be completely sealed. Gently opening and closing the door helps the door operate smoothly, sustainably and safely. Note for you that do not make the door too big and overload.

6. Poor quality aluminum makes aluminum doors slump
- Reason
Aluminum is an important material that makes up a door. Failure to use aluminum leads to many problems with the door. One round of them is a sagging aluminum door. In addition, the poor quality of aluminum doors and not guaranteeing the installation also easily leads to wing sagging and rapid deterioration.

- How to fix
Choose a reputable, quality, affordable aluminum company. Grando is for you. Should choose thick aluminum profiles such as Xingfa aluminum, Viet Phap aluminum, GDY aluminum, GDP ... Regularly maintain and clean the aluminum doors. Avoid bad impacts from outside, the aluminum door controls quickly damage, sagging wings.

Contact: 0917522.222 for support

See also: 4 ways to identify quality Xingfa aluminum