NOTES WHEN INSTALLING THE ALUMINUM DOORS
Currently, aluminum and glass doors are the main materials of the construction industry. There are many buildings, skyscrapers or commercial centers using aluminum and glass doors. The problem is that not everyone does well to construct aluminum and glass doors. Not only depends on the craftsmanship but also the homeowners should grasp a certain number of notes.
What are the advantages of aluminum and glass doors?
The reason that aluminum and glass doors are chosen as a popular material is because of the advantages that it offers. Based on the performance and physical and chemical properties of Aluminum Alloy, this Material becomes more easily accessible to users. Some advantages of aluminum and glass doors:
- Light material, anti-corrosion, termite, rust-free.
- High safety, withstand strong impacts of weather
- Easy to install, clean and maintain
- Reasonable price suitable for many subjects
- Diverse designs, bold modern, luxurious and
- Aluminum and glass doors always create ventilation for the space
- Describe the unique features in the interior space decoration.
See also: Outstanding Advantages of Xingfa Grando Aluminum.
Note when constructing aluminum and glass doors
When installing aluminum and glass doors, it is a technical factor. If the specifications are not well guaranteed, it will affect the quality of the door.
Below, Grando shares with readers the notes on the construction of aluminum and glass doors.
- The screw hole seals must be fully glued to ensure that the screw caps are installed on the bottom edge of the window frame
- When injecting glue, pay attention to the gap. The surrounding glue injection must be even and balanced. To pump the foam, the bottom edge of the frame must have a minimum gap of at least 3mm
- The aluminum frame is square, the horizontal edges are balanced and balanced. If constructing the aluminum door, pay attention to the lower sliding rail not to be bent. Deviation is only from 0 - 0.5 degrees for doors. For fixed glass wall is from 0 - 1 degree
- One factor that should not be overlooked when constructing aluminum and glass doors is the standard of drilling holes when installed. Use screws to fasten to the frame. The distance from the puzzle connector positions to the drilling position is 100 to 150. The installation screws must not be placed in the correct position between the coupling connector and the end of the frame.
See also: Things to Know About Current Xingfa Aluminum Characteristics
Some other notes when constructing aluminum and glass doors
In addition to the technical note as mentioned above, the construction of aluminum and glass doors also requires some additional grasping as follows: - For sliding doors or doors, windows: the frame is evenly spaced from the inner and outer edges. - For inner open doors: the inside edge of the frame must be 8mm from the inside edge of the wall - For outside open doors: the outer edge of the frame is 88mm away from the outside edge of the wall - For tempered glass walls, the position of the frame The enclosure will depend on the user's needs - The vertical requirements of the enclosure: must be parallel to the vertical direction of the beam - Requirements for the width of the enclosure: to be parallel to the wall edge as the original standard when mounting. put. - Another note is that the whole frame does not deviate from parallelogram (two diagonal lines of different lengths) or each part of the frame is pinched by the envelope wall. Please pay attention to the above issues. It will make the construction of your aluminum and glass doors easier. It is both technically correct and convenient to meet the advantages of an aluminum and glass door. Details contact support directly, hotline: 0917.522.222 See also: Compare Van Go Aluminum Door With Traditional Wooden Door
